Spray for Nozzle Cleaning (500ml) - S@S Scheftner 230100

S@S Scheftner Universal-Oil Spray

Title: S@S Scheftner Universal-Oil Spray for Dental Handpieces (500ml) - 230100

English Description:

Maximize the Lifespan of Your Dental Handpieces with S@S Scheftner Universal-Oil Spray

This essential 500ml Universal-Oil Spray (Ref. 230100) from S@S Scheftner (Germany) is a specially formulated, alcohol-based lubricant designed for all types of dental handpieces, including turbines and contra-angles. Its superior cleaning and lubricating properties ensure optimal performance and extend the life of your valuable equipment.

Effective Cleaning and Lubrication:

The spray effectively cleans and lubricates bearings in both turbine and contra-angle handpieces, preventing premature wear and tear. Regular use minimizes downtime and reduces the risk of costly repairs.

Recommended Usage:

• Daily Maintenance: Apply twice daily – once after the morning shift and again at the end of the day.
• Continuous Use: Lubricate the handpiece every 30 minutes during continuous use.
• Comprehensive Lubrication: Don't just lubricate the water and air systems. Remember to lubricate the head and chuck as well. Disassemble the handpiece and lubricate each component thoroughly. Pay special attention to handpieces used for polishing, as polishing paste can accumulate in the head.
• Post-Lubrication Procedure: After lubrication, attach the handpiece to the micromotor and allow excess oil to drain. Run the micromotor for approximately 30 seconds. If oil continues to be expelled, wipe the handpiece clean and repeat the process until oil expulsion ceases. Oil on the tooth surface can interfere with procedures such as filling or cleaning.

Lubrication Instructions:

Turbine Handpiece:

1. Disconnect the turbine handpiece from the handpiece coupler.
2. Insert the spray nozzle into the turbine housing (from the connector side) and spray.
3. Ensure the spray reaches the front of the head.
4. Repeat spraying until clean oil is expelled, indicating the removal of old, contaminated lubricant.
5. Regularly maintain the chuck (recommended weekly).

Contra-Angle Handpiece:

1. Disconnect the contra-angle handpiece from the motor.
2. Insert the spray nozzle into the contra-angle handpiece and spray.
3. Hold the handpiece firmly to prevent it from being dislodged by the spray pressure.
4. Ensure the oil exits the top of the contra-angle handpiece.
5. Repeat spraying until clean oil is expelled.
6. Regularly maintain the chuck (recommended weekly).

Preventative Maintenance:

Regular lubrication prevents:

• Turbine slowdown
• Increased noise and vibration
• Noticeable bur wobble

Order your S@S Scheftner Universal-Oil Spray today and experience the difference!

Keywords:

Dental handpiece spray, turbine handpiece lubricant, contra-angle handpiece lubricant, dental handpiece maintenance, S@S Scheftner, Universal-Oil Spray, 230100, dental lubricant, dental instrument care, dental handpiece repair, preventative dental maintenance, micromotor maintenance, dental hygiene, 500ml lubricant spray, Germany, dental equipment maintenance, high-speed handpiece lubricant